accredited
laboratory

EMC testing laboratory
AB 1765

a part of great
projects

about EMC
research in plum

Electronics testing at the Accredited EMC Laboratory in Plum provides the opportunity to test devices at the design stage.

A positive result from electromagnetic compatibility tests conducted in the accredited laboratory AB 1765 confirms the device's compliance with reference standards and provides the basis for applying for the CE mark placement on the device.

PLUM ELECTRONICS

testing of electronic devices
at the design stage

The Accredited Electromagnetic Compatibility Laboratory EMC AB 1765 conducts research on resistance to electrostatic discharge (ESD), conducted disturbances at radio frequencies, bursts of fast electrical transients (BURST), surges (SURGE), sags, interruptions, and variations in power supply voltage (PQT), radiated electromagnetic fields at radio frequencies, and testing of emitted conducted and radiated disturbances.

Introducing any product containing electronics to both domestic and international markets requires conducting appropriate electromagnetic compatibility testing. We will conduct tests on your products.

what services
do we provide

Introducing any product containing electronics to both domestic and international markets requires conducting appropriate electromagnetic compatibility tests. We will conduct tests on your products. Our accredited Electromagnetic Compatibility Laboratory performs tests on:

Voltage dips, short interruptions, and voltage changes resistance

Range:
from 0% UT to 100% UT.

Standards:
PN-EN IEC 61000-4-11:2020-11,
PN-EN IEC 55014-2:2021-08.

Resistance to voltage dips, short interruptions, and voltage changes occurring in the DC power supply inlet

Range:
from 0% UT to 120% UT.

Standards:
PN-EN 61000-4-29:2004,
PN-EN IEC 55014-2:2021-08.

Resistance to a series of fast electrical transients.

Range:
from 0.2 kV to 4.0 kV.

Standards:
PN-EN 61000-4-4:2013-05,
PN-EN IEC 55014-2:2021-08.

Resistance to radiated electromagnetic fields at radio frequency

Electric field strength up to 10 V/m.

Range:
from 80 MHz to 3000 MHz (GTEM chamber).

Standards:
PN-EN IEC 61000-4-3:2021-06,
PN-EN 61000-4-20:2011,
PN-EN IEC 55014-2:2021-08.

Resistance to conducted disturbances induced by radio-frequency fields

Range:
from 0.15 MHz to 230 MHz.

Standards:
PN-EN 61000-4-6:2014-04,
PN-EN IEC 55014-2:2021-08.

Resistance to electrostatic discharges

Range:
from 2 kV to 30 kV.

Standards:
PN-EN 61000-4-2:2011,
PN-EN IEC 55014-2:2021-08.

Resistance to surges

Range:
from 0.5 kV to 4.0 kV.

Standards:
PN-EN 61000-4-5:2014-10,
PN-EN 61000-4-5:2014-10/A1:2018-01,
PN-EN IEC 55014-2:2021-08.

Emission of radiated disturbances

Range:
from 30 MHz to 3000 MHz (GTEM chamber).

Standards:
PN-EN 55011:2016-05,
PN-EN 55011:2016-05/A1:2017-06,
PN-EN 55011:2016-05/A11:2020-07,
PN-EN 55011:2016-05/A2:2021-08,
PN-EN 61000-4-20:2011,
PN-EN 55032:2015-09,
PN-EN 55032:2015-09/AC:2016-09,
PN-EN 55032:2015-09/Ap1:2017-12,
PN-EN 55032:2015-09/A11:2020-07,
PN-EN 55032:2015-09/A1:2021-05,
PN-EN IEC 55014-1:2021-08.

Conducted disturbance emission

Range:
from 9 kHz to 30 MHz.

Standards:
PN-EN 55011:2016-05,
PN-EN 55011:2016-05/A1:2017-06,
PN-EN 55011:2016-05/A11:2020-07,
PN-EN 55011:2016-05/A2:2021-08,
PN-EN IEC 55014-1:2021-08,
PN-EN 55032:2015-09,
PN-EN 55032:2015-09/AC:2016-09,
PN-EN 55032:2015-09/Ap1:2017-12,
PN-EN 55032:2015-09/A11:2020-07,
PN-EN 55032:2015-09/A1:2021-05.

what devices
do we test

electrical and electronic
devices

industrial and scientific devices

information technology
and multimedia devices

household
appliances

toys

medical and telecommunications
devices

why choose
plum EMC testing laboratory

transparency and support
in the collaboration process

 

The knowledge and expertise of specialists employed in the EMC laboratory in the field of electronic testing and support in obtaining the CE certificate guarantee the quality of the services we provide. The adopted collaboration process ensures a sense of security and effectiveness in handling our clients’ submissions.

PCA
accreditation

-

The Plum Laboratories team provides services under accreditation certificates AP 074 and AB 1765 granted by the Polish Centre for Accreditation.

attractive
lead time

-

We strive to conduct processes in such a way that the execution time of orders is as short as possible.

high quality
equipment

-

The equipment and standards we use, with the highest precision, enable us to provide laboratory services at the highest level. All used standards and instruments are referenced to national standards to ensure measurement consistency.

highest
quality of service

-

Participation in interlaboratory comparisons, knowledge and experience of laboratory staff, and low measurement uncertainty in CMC (Calibration and Measurement Capability), achieved through possessing standards of the highest precision, guarantee the high quality of our services.

professional
customer service

-

Our Customer Service Department will respond quickly and efficiently to all your inquiries.

competitive
prices

-

We aim to ensure that the prices of our services are always competitive.

how
do we cooperate

We are transparent at every stage of order fulfillment. We are here to assist at every step.

Review
of the inquiry

step 1.
We analyze your needs in detail and ensure that we have the necessary resources. We assist in selecting the appropriate testing method.

Order
placement

step 2.
We await acceptance of the order and service order.

Delivery
of the device

step 3.
We await the delivery of the device. The Customer Service Department checks the technical condition of the device and marks it for further testing.

Order
acceptance

step 4.
We check the compliance of the records. We send an order confirmation, and the device goes to the laboratory (acclimatization).

Testing

step 5.
We commence the testing of the device.

Authorization

step 6.
We carefully analyze the results and issue the proof of device's examination.

Order completion
and shipping

step 7.
We carefully secure your instrument, include documents, and dispatch the device.

see how we test
devices in our laboratory

Do you need a quote?
Fill out the form and describe what kind of services are you interested in.

    Step 1. Select service

    Step 2. Specify device data

    Step 3. Fill in contact details

    Available EMC testing:

    Do you want to price the test? Go to the next step and ask for an offer.

    Step 1. Select service

    Step 2. Specify device data

    Step 3. Fill in contact details

    Describe the device:

    Step 1. Select service

    Step 2. Specify device data

    Step 3. Fill in contact details

    Fill in contact details:

    The administrator of your data is PLUM Sp. z o.o. with its registered office in Ignatki, ul. Wspólna 19, 16-001 Kleosin. Your data is processed in order to respond to inquiries made through the contact form or provided contact details, and to secure possible claims, which constitutes our legitimate interest. In the case where the notification is related to a contract we have with you, the purpose of processing your personal data is the execution of this contract. If you have given marketing consents, your data is additionally processed for the purpose of conducting marketing communication with you through your chosen communication channel. You have the right to request access to your personal data, their correction, deletion, or limitation of processing, as well as the right to object to the processing and to lodge a complaint with the supervisory authority. Detailed information concerning the processing of your personal data can be found HERE.

    I consent to the sending by PLUM Sp. z o.o. with its registered office in Ignatki, ul. Wspólna 19, 16-001 Kleosin (PLUM), to the phone number provided in the form, SMS/MMS messages containing commercial and marketing information regarding PLUM, including information on the range of activities of PLUM and products and services offered by PLUM, as well as promotions, also using automatic calling systems, which involves the use of telecommunication terminal equipment of which I am a user.

    I consent to the making of phone calls by PLUM Sp. z o.o. with its registered office in Ignatki, ul. Wspólna 19, 16-001 Kleosin (PLUM), to the phone number provided in the form for the purpose of conveying commercial and marketing information regarding PLUM, including commercial and marketing information about PLUM's activities and products and services offered by PLUM, also using automatic calling systems, which involves the use of telecommunication terminal equipment of which I am a user. .

    I consent to the sending by PLUM Sp. z o.o. with its registered office in Ignatki, ul. Wspólna 19, 16-001 Kleosin (PLUM), to the email address provided in the form, email messages containing commercial and marketing information regarding PLUM, including information on PLUM’s range of activities and products and services offered by PLUM, as well as promotions, which involves the use of telecommunication terminal equipment of which I am a user.